- 18Holes
- 72Par
- 5Rated tees
- 18Greens mapped
- 147Contours
- 7.9%Steepest slope
About Crestview
Crestview Golf Course is an 18-hole golf course playing to par 72 in Zeeland, Michigan. Bill Austhof designed it, and it opened in 1961. GolfCore has mapped 18 greens here with contour lines and fall-line arrows. The card below lists 5 rated tees with yardages for all 18 holes. GPS yardages and scoring are free in the GolfCore app.
Plan your visit
6279 96th Avenue
+1 (616) 875-8101
How the greens break
GolfCore traced 18 greens at Crestview from USGS 3DEP 1-meter lidar, with 147 elevation contours at a 3-inch interval. The steepest measured slope is 7.9 percent, and the largest rise across a single green is 3.7 ft.
In the app the same map sits under your ball on every green, with the fall line drawn to the hole and the wind modeled at your position. At clubs that run GolfCore, the pins the shop sets each morning show up there too.
The card
| Hole | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | Out |
|---|---|---|---|---|---|---|---|---|---|---|
| Par | 5 | 4 | 4 | 4 | 3 | 4 | 3 | 4 | 5 | 36 |
| Yards | 458 | 264 | 255 | 305 | 166 | 275 | 145 | 293 | 505 | 2,666 |
| Hcp | 12 | 6 | 16 | 18 | 8 | 10 | 14 | 4 | 2 |
| Hole | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | In |
|---|---|---|---|---|---|---|---|---|---|---|
| Par | 4 | 3 | 4 | 3 | 5 | 4 | 4 | 4 | 5 | 36 |
| Yards | 382 | 118 | 386 | 152 | 525 | 388 | 347 | 341 | 454 | 3,093 |
| Hcp | 11 | 17 | 1 | 15 | 7 | 3 | 5 | 9 | 13 |
Total72 Yards5,759
| Hole | Par | Yards | Hcp |
|---|---|---|---|
| 1 | 5 | 458 | 12 |
| 2 | 4 | 264 | 6 |
| 3 | 4 | 255 | 16 |
| 4 | 4 | 305 | 18 |
| 5 | 3 | 166 | 8 |
| 6 | 4 | 275 | 10 |
| 7 | 3 | 145 | 14 |
| 8 | 4 | 293 | 4 |
| 9 | 5 | 505 | 2 |
| Out | 36 | 2,666 | |
| 10 | 4 | 382 | 11 |
| 11 | 3 | 118 | 17 |
| 12 | 4 | 386 | 1 |
| 13 | 3 | 152 | 15 |
| 14 | 5 | 525 | 7 |
| 15 | 4 | 388 | 3 |
| 16 | 4 | 347 | 5 |
| 17 | 4 | 341 | 9 |
| 18 | 5 | 454 | 13 |
| In | 36 | 3,093 | |
| Total | 72 | 5,759 |
Course rating and slope
| Tee | Yards | Par | Rating / Slope |
|---|---|---|---|
| Blue | 6,040 | 72 | 69.6 / 120 74.0 / 130 (W) |
| White | 5,759 | 72 | 68.0 / 118 |
| Gold | 5,042 | 72 | 63.7 / 108 |
| Red | 4,963 | 72 | 62.7 / 104 |
Hole data is what GolfCore holds for the course's layout. Picking a tee shows that tee's own yardages, pars and stroke indexes where the club has rated them. Spot a wrong par, yardage or stroke index? Report it from Map Settings in the app, or send us a correction.
Course details
- Location
- Zeeland, Michigan, United States
- Address
- 6279 96th Avenue
- Phone
- +1 (616) 875-8101
- Website
- crestviewgolf.com
- Architect
- Bill Austhof
- Opened
- 1961
- Holes
- 18
- Par
- 72
- Tees on the card
- 5, 5 USGA-rated
- Greens mapped
- 18
- Elevation contours
- 147
- Contour interval
- 3-inch
- Largest green elevation span
- 3.7 ft
- Steepest measured slope
- 7.9%
- Course map
- Traced hole by hole
- Wind modeling
- Live wind grid, 16 directions
- Tree canopy
- 1-meter canopy height model
- Course data updated
- 2026-11-10
More courses nearby
Straight-line distance from Crestview Golf Course.
-
Three Fires GcHolland, Michigan5 mi straight-line
18 holes, par 71, scorecard, course map, green maps
- West Ottawa Golf Course
Holland, Michigan5.3 mi straight-line
18 holes, par 71, scorecard, course map, green maps
-
Pigeon CreekWest Olive, Michigan5.9 mi straight-line
18 holes, par 71, scorecard, course map, green maps
-
Macatawa Legends Golf & Country ClubHolland, Michigan6 mi straight-line
18 holes, par 72, scorecard, course map, green maps
- Pheasant Golf Course, The
Zeeland, Michigan0.3 mi straight-line
9 holes, par 36, scorecard, course map, green maps
- Holland Country Club
Holland, Michigan6.3 mi straight-line
18 holes, par 70, scorecard
Staff at Crestview can claim this course by signing in with an email address at the club's own domain, then edit its address, phone, website and crest at no charge. Read how a club keeps its course right. The same system runs a club's tee sheet and caddie yard; read how caddie management on GolfCore works.