- 18Holes
- 70Par
- 1Rated tee
- 2Greens mapped
- 14Contours
- 9.2%Steepest slope
About Deer Trails
Deer Trails Country Club is an 18-hole golf course playing to par 70 in Industry, Pennsylvania. It opened in 1964. GolfCore has mapped 2 greens here with contour lines and fall-line arrows. The card below lists 1 rated tee with yardages for all 18 holes. GPS yardages and scoring are free in the GolfCore app.
Plan your visit
311 Engle Rd, Industry, PA 15052-1605
+1 (724) 643-4710
How the greens break
GolfCore traced 2 greens at Deer Trails from USGS 3DEP 1-meter lidar, with 14 elevation contours at a 3-inch interval. The steepest measured slope is 9.2 percent, and the largest rise across a single green is 2.4 ft.
In the app the same map sits under your ball on every green, with the fall line drawn to the hole and the wind modeled at your position. At clubs that run GolfCore, the pins the shop sets each morning show up there too.
Elevation: USGS 3D Elevation Program, U.S. Geological Survey, National Geospatial Program (public domain), processed by GolfCore.
The card
| Hole | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | Out |
|---|---|---|---|---|---|---|---|---|---|---|
| Par | 4 | 5 | 4 | 4 | 3 | 4 | 4 | 4 | 3 | 35 |
| Yards | 375 | 416 | 305 | 296 | 163 | 314 | 295 | 252 | 149 | 2,565 |
| Hcp | 1 | 9 | 7 | 15 | 3 | 5 | 13 | 17 | 11 |
| Hole | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | In |
|---|---|---|---|---|---|---|---|---|---|---|
| Par | 4 | 5 | 4 | 4 | 3 | 4 | 4 | 4 | 3 | 35 |
| Yards | 401 | 442 | 326 | 300 | 181 | 332 | 338 | 288 | 178 | 2,786 |
| Hcp | 2 | 10 | 8 | 16 | 4 | 6 | 14 | 18 | 12 |
Total70 Yards5,351
| Hole | Par | Yards | Hcp |
|---|---|---|---|
| 1 | 4 | 375 | 1 |
| 2 | 5 | 416 | 9 |
| 3 | 4 | 305 | 7 |
| 4 | 4 | 296 | 15 |
| 5 | 3 | 163 | 3 |
| 6 | 4 | 314 | 5 |
| 7 | 4 | 295 | 13 |
| 8 | 4 | 252 | 17 |
| 9 | 3 | 149 | 11 |
| Out | 35 | 2,565 | |
| 10 | 4 | 401 | 2 |
| 11 | 5 | 442 | 10 |
| 12 | 4 | 326 | 8 |
| 13 | 4 | 300 | 16 |
| 14 | 3 | 181 | 4 |
| 15 | 4 | 332 | 6 |
| 16 | 4 | 338 | 14 |
| 17 | 4 | 288 | 18 |
| 18 | 3 | 178 | 12 |
| In | 35 | 2,786 | |
| Total | 70 | 5,351 |
Course rating and slope
| Tee | Yards | Par | Rating / Slope |
|---|---|---|---|
| White | 5,351 | 70 | 67.3 / 120 |
Hole data is what GolfCore holds for the course's layout. Picking a tee shows that tee's own yardages, pars and stroke indexes where the club has rated them. Spot a wrong par, yardage or stroke index? Report it from Map Settings in the app, or send us a correction.
Course details
- Location
- Industry, Pennsylvania, United States
- Address
- 311 Engle Rd, Industry, PA 15052-1605
- Phone
- +1 (724) 643-4710
- Website
- deertrailscc.com
- Opened
- 1964
- Holes
- 18
- Par
- 70
- Tees on the card
- 1, 1 USGA-rated
- Greens mapped
- 2
- Elevation contours
- 14
- Contour interval
- 3-inch
- Largest green elevation span
- 2.4 ft
- Steepest measured slope
- 9.2%
- Course map
- Traced hole by hole
- Wind modeling
- Live wind grid, 16 directions
- Tree canopy
- 1-meter canopy height model
- Course data updated
- 2026-11-07
More courses nearby
Straight-line distance from Deer Trails Country Club.
-
Seven Oaks Country ClubBeaver, Pennsylvania2.9 mi straight-line
18 holes, par 72, scorecard, course map, green maps
-
Rolling Acres Golf CourseBeaver Falls, Pennsylvania5.2 mi straight-line
18 holes, par 73, scorecard, course map, green maps
-
Black Hawk Golf CourseBeaver Falls, Pennsylvania6.7 mi straight-line
18 holes, par 72, scorecard, course map, green maps
-
Turkana Golf CourseEast Liverpool, Ohio7 mi straight-line
18 holes, par 72, scorecard, course map, green maps
- Hawthorne Valley
Midland, Pennsylvania3.7 mi straight-line
9 holes, par 36, scorecard
- River's Edge Golf Course
Industry, Pennsylvania2.1 mi straight-line
9 holes, par 35, scorecard
Staff at Deer Trails can claim this course by signing in with an email address at the club's own domain, then edit its address, phone, website and crest at no charge. Read how a club keeps its course right. The same system runs a club's tee sheet and caddie yard; read how caddie management on GolfCore works.