- 18Holes
- 72Par
- 7Rated tees
- 7Greens mapped
- 64Contours
- 7.6%Steepest slope
About Oakview
Oakview Golf and Country Club is an 18-hole golf course playing to par 72 in Gretna, Canada. It opened in 1952. GolfCore has mapped 7 greens here with contour lines and fall-line arrows. The card below lists 7 rated tees with yardages for all 18 holes. GPS yardages and scoring are free in the GolfCore app.
Plan your visit
1084 MB-30, Gretna, MB R0G 0V0
+1 (204) 327-5590
How the greens break
GolfCore traced 7 greens at Oakview from 1-meter national lidar elevation data, with 64 elevation contours at a 8-centimeter interval. The steepest measured slope is 7.6 percent, and the largest rise across a single green is 0.88 m.
In the app the same map sits under your ball on every green, with the fall line drawn to the hole and the wind modeled at your position. At clubs that run GolfCore, the pins the shop sets each morning show up there too.
The card
| Hole | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | Out |
|---|---|---|---|---|---|---|---|---|---|---|
| Par | 5 | 4 | 5 | 4 | 4 | 4 | 4 | 3 | 3 | 36 |
| Yards | 480 | 355 | 528 | 392 | 279 | 448 | 347 | 219 | 170 | 3,218 |
| Hcp | 3 | 11 | 13 | 7 | 17 | 1 | 9 | 5 | 15 |
| Hole | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | In |
|---|---|---|---|---|---|---|---|---|---|---|
| Par | 5 | 4 | 5 | 4 | 4 | 4 | 4 | 3 | 3 | 36 |
| Yards | 480 | 355 | 528 | 392 | 279 | 448 | 347 | 219 | 170 | 3,218 |
| Hcp | 4 | 12 | 14 | 8 | 18 | 2 | 10 | 6 | 16 |
Total72 Yards6,436
| Hole | Par | Yards | Hcp |
|---|---|---|---|
| 1 | 5 | 480 | 3 |
| 2 | 4 | 355 | 11 |
| 3 | 5 | 528 | 13 |
| 4 | 4 | 392 | 7 |
| 5 | 4 | 279 | 17 |
| 6 | 4 | 448 | 1 |
| 7 | 4 | 347 | 9 |
| 8 | 3 | 219 | 5 |
| 9 | 3 | 170 | 15 |
| Out | 36 | 3,218 | |
| 10 | 5 | 480 | 4 |
| 11 | 4 | 355 | 12 |
| 12 | 5 | 528 | 14 |
| 13 | 4 | 392 | 8 |
| 14 | 4 | 279 | 18 |
| 15 | 4 | 448 | 2 |
| 16 | 4 | 347 | 10 |
| 17 | 3 | 219 | 6 |
| 18 | 3 | 170 | 16 |
| In | 36 | 3,218 | |
| Total | 72 | 6,436 |
Course rating and slope
| Tee | Yards | Par | Rating / Slope |
|---|---|---|---|
| Black | 6,436 | 72 | 71.0 / 115 76.1 / 135 (W) |
| Orange | 6,222 | 72 | 70.0 / 113 |
| Green | 5,604 | 70 | 66.4 / 110 72.0 / 124 (W) |
| Yellow | 4,010 | 66 | 59.8 / 93 62.4 / 100 (W) |
Hole data is what GolfCore holds for the course's layout. Picking a tee shows that tee's own yardages, pars and stroke indexes where the club has rated them. Spot a wrong par, yardage or stroke index? Report it from Map Settings in the app, or send us a correction.
Course details
- Location
- Gretna, Canada
- Address
- 1084 MB-30, Gretna, MB R0G 0V0
- Phone
- +1 (204) 327-5590
- Website
- oakviewgolf.ca
- Opened
- 1952
- Holes
- 18
- Par
- 72
- Tees on the card
- 7, 7 USGA-rated
- Greens mapped
- 7
- Elevation contours
- 64
- Contour interval
- 8-centimeter
- Largest green elevation span
- 0.88 m
- Steepest measured slope
- 7.6%
- Course map
- Traced hole by hole
- Wind modeling
- Live wind grid, 16 directions
- Tree canopy
- 1-meter canopy height model
- Course data updated
- 2026-11-10
More courses nearby
Straight-line distance from Oakview Golf and Country Club.
- Cavalier Country Club
Cavalier, North Dakota31.5 km straight-line
18 holes, par 72, scorecard, course map, green maps
-
Walhalla Country ClubWalhalla, North Dakota36.7 km straight-line
18 holes, par 72, scorecard, course map, green maps
- Pembina Golf Club
Pembina, North Dakota24.2 km straight-line
9 holes, par 34, scorecard, course map, green maps
- Emerson
26.4 km straight-line
5 holes, scorecard, course map, green maps
-
Kyle Memorial Golf CourseSaint-Pierre-Jolys31.9 km straight-line
18 holes, par 66, scorecard, course map, green maps
- Winkler Golf Club
Winkler33.9 km straight-line
18 holes, par 71, scorecard, course map, green maps
Staff at Oakview can claim this course by signing in with an email address at the club's own domain, then edit its address, phone, website and crest at no charge. Read how a club keeps its course right. The same system runs a club's tee sheet and caddie yard; read how caddie management on GolfCore works.